If you often make this mistake while heating water with immersion rod, then understand that it will cause huge loss.

While using the immersion rod, sometimes electric shock may occur and sometimes the immersion rod gets busted. To avoid all these problems, you should use the tips mentioned here.

It is a common practice to use immersion rods to heat water in winter. This is a cheap and easy method, but if you make some mistakes while using it, it can cause big loss to you.

Many times, while using the immersion rod, electric shock is also caused, along with this, the immersion rod sometimes gets busted. If you want to avoid all these problems, then you should use the tips mentioned here.

These mistakes are made while using immersion rods.

Using a plastic bucket: Always use a plastic bucket when using an immersion rod. Using iron or steel bucket increases the risk of electric shock.

Underfilling: Start the immersion rod only after immersing it in water. If there is less water, the rod may burn.

Leaving the rod on for too long: Leaving the immersion rod on for too long can melt the bucket or burn the rod.

Taking the immersion rod out of the water to check the water temperature: Taking the immersion rod out of the water can result in electric shock. To check the water temperature, take the rod out of the water only after turning off the switch.

Take these precautions while buying immersion rod

Buy immersion rods of good quality.

Read the instructions carefully before using the immersion rod.

Keep the immersion rod out of the reach of children and pets.

If you follow these safety measures, you will be safe when using an immersion rod.

There are many people who, in a hurry to heat water, turn on the heating rod beforehand and then put it in the bucket. But this is a big mistake because there is a risk of electric shock.